– 55 –
3. Press SHIFT FUNC and then select “Password”.
4. Select “Modify password”, which causes the currently registered password to
appear.
5. Make any changes to the password you want, and then press OK to store the new
password.
To delete the password
1. Turn on the Digital Diary.
• “INPUT PASSWORD” appears on the display.
2. Input the correct password and press OK.
3. Press SHIFT FUNC and then select “Password”.
4. Select “Delete password”, which causes a confirmation message to appear
asking if you really want to delete your password.
5. Press Y to delete or N to abort.
• After you delete the password data protected modes can be viewed by anyone.
To lock memory without turning power off
1. While using the Digital Diary after you have input your password, press SHIFT
FUNC and then select “Password”.
2. Press 3 to select “Lock system”.
• Now when you try to enter another protected mode, the password input screen
appears and you will have to input your password again.
To Next Page
Loading...
Need help?
General
