118
E
User Maintenance and Options
Step 2
Remove the printer cover.
(If the cover is locked, unlock
by using the printer cover key
before this step.)
Step 3
Press j to feed about 20
cm of paper.
Step 4
Cut the journal paper at the
point where nothing is
printed.
Step 6
Slide the printed journal from
the take-up reel.
Step 7
Open the platen arm.
Step 8
Remove the old paper roll
from the cash register.
Step 9
Load new paper.
Go to the step 3 described on
page 14 of this manual.
Step 1
Turn the mode switch to
REG1 position.
To replace journal paper
REG2 X1
REG1 Z1
OFF X2/Z2
RF
PGM
Step 5
Remove the journal take-up
reel from its holder.
To Next Page
Loading...
Need help?
General
