Casio TK-2300

Read and Reset Reports
Individual Totalizer You can issue read and reset reports for individual totalizers by inputting
Reports the applicable report code. Issuing a report may or may not open the
drawer, depending on the type of totalizer being reported.
Report
Code
Table
Report
Code
Daily
Sales
Periodic
Seles
|
Totalizer
Type
pgeectge
ley
Read Reset Read Reset
"1 1 1111 att Fixed totalizer YES
2 7 2 112 212 Free function 3 ; “NO
13 13 113 213 Short PLU or Short PLU Group NO
[14 14 114 214 Long PLU or Long PLU Group ~ NO
15 15 115 215 Department NO
16 16 116 216 Group total NO
17 7 17 117 217 Clerk YES
19 19 119 219 Hourly sales NO |
20 _ 20 120 220 Monthly sales NO
28 28 128 228 Table analysis NO |
64 64 - _ Long PLU Stock : NO
71 - - - Financial H YES ,
ait 81" 181° 261° Flat-Long PLU 1st menu only “ ; NO
82" 82" 182° 282° Flat-Long PLU 2nd menu only "! NO
83 63°? i “483 | 283 ‘2 | Flat-Long PLU 3rd menu only ; NO |
"1 This operation is possible only when inventory amounts, number of items, and monetary
amounts registered using Flat-Long PLU menus 1 and 2 are being accumulated into menu
3 totalizers.
*3 The cash register can be programmed to issue reports for menu 3 only, resetting the menu
3 totalizers and counters only, or to issue reports for menu 3 only, resetting the menu 1, 2,
and 3 totalizers and counters.
To issue daily sales
reset reports
1. Input a 2-digit report code from the above table.
2. Cash Amount Tendered key on the standard keyboard.
To issue periodic
sales read/reset
reports
1. Input a 2-digit report code from the above table.
2. Cash Amount Tendered key on the standard keyboard.
83