E-24
Connecting the Power Supply and Various Devices
Insert the SD Card
(1) Insert the SD card, front-side up, into
the SD/SDHC memory card slot located
within the back of the display.
Connecting the HDMI Device
(1) Connect the HDMI cable to the HDMI
port within the back of the display.
3. After completing the connection of
all devices you plan to use, install
the supplied connector cover with 3
screws.
+
During installation, take care not to trap the connected cable between the connector cover
and the display.
To Next Page
Loading...
Need help?
General
