(1) Move the cursor to "Information Menu" in the main menu and press the [ENTER] button. (2) On the main unit, press the [AUTO],
[INPUT],
[FOCUS] and [MENU] buttons at the same time. (This item cannot be performed using the remote control). (3) The gray text "Set
Unit Time" will change color to black, its use
XJ-A240/A245
active until exiting the diagnostic program.
NOTE: after activating the "Set Unit Time" line, it will remain
will become possible.
The item highlighted in gray
will become available.
(4) Move the cursor to "Set Unit Time" and press the [ENTER] button to change the unit time.
4-8. Setting device time
-10-
Machine Translated by Google
To Next Page
Loading...
