remote control, the password cannot be entered).
5-2. Deleting Passwords (Confidential - For Home Use Only) NOTE: Under no circumstances should users
delete passwords, nor should they be told how passwords are deleted. If users are interested in the password removal method, it
is forbidden to give them such information, password removal should be carried out only with the knowledge of Casio.
The password protection function provides protection against unauthorized use of the projector.
If a user asks to remove a password, the user must be warned that: • Passwords and settings
will be reset to factory defaults. • The user will have to pay a fixed fee (fee for minor
repairs).
] (Down cursor button), [
5-1. About the password protection function • The password
can only be entered using the buttons on the remote control. (in case of loss
Passwords can be cleared in two ways: (1) Using the
"Initializing" menu option in the test program to initialize the projector and reset the password to factory default. Please note that
this will erase other settings and lamp hours. Always
write down the setup data before initializing the projector so that you can restore it later. (2) The "Setting Backup Tool" menu item
can be used to check and change the password. For details, please refer to "9.7 Uploading Backup
] (Left cursor button), [
• When shipped from the factory, the following password is set: [INPUT], [AUTO], [BLANK], [FREEZE], ] (button
data".
XJ-A240/A245
• You can set/change the password by going to "Setup Menu" ÿ "Device Settings 1" ÿ "Power On Password". • The password can
only be changed after entering the correct password set at the factory. • After selecting “Power On
Password”, the password input window appears every time the power is turned on. If this function is selected, you cannot use
any of the device's functions without entering a password.
[ ] (cursor up button), [ cursor right).
5. PASSWORDS
-11-
Machine Translated by Google
To Next Page
Loading...
