Casio XJ-A246 - Restoring Projector Settings to Factory Defaults; Resetting Specific Main Menus to Defaults

31
4. Use the [
T
] and [
S
] keys to move the highlighting to the connection name you
want to select and then press the [ENTER] key.
z This will cause a “Do you want to change the wireless connection?” confirmation dialog box to
appear.
5. Press the [
S
] key to move the highlighting to “Yes” and then press the [ENTER]
key.
z The wireless connection needs to be restarted in order to reflect the change, which will cause
the projected image to go blank. It may take a little time before the wireless screen is
projected again.
To initialize the Wireless setup
1. While the Wireless screen is being projected, press the [MENU] key.
2. Use the [
T
] key to move the highlighting to “Wireless” and then press the
[ENTER] key.
3. Use the [
T
] key to move the highlighting to “Initialize Wireless Setup” and then
press the [ENTER] key.
z This will cause a “Initialize the Wireless setup?” confirmation dialog box to appear.
4. Press the [
S
] key to move the highlighting to “Yes” and then press the [ENTER]
key.
z This returns all projector network settings (all settings on the System Admin page) to their
initial defaults. For details, see “System Admin Page Settings” (page 36).