11
Installing Multi Projection Camera Update Software
A YC-400 Multi Projection Camera can be connected to the Data Projector only if it is running firmware
version 1.1 or higher. For information about how to check the firmware version of a camera, refer to
the documentation below.
z “YC-400 Firmware Update Software ver.1.1”, which can be downloaded from the CASIO website
(page 8)
z “YC-Update_Guide_English.pdf”, which can be found in the “English” folder inside the “User’s
Guide” folder on the CD-ROM that comes with some projector models
To download the software from the CASIO website and install it
1.
Visit the CASIO website (page 8) and download “YC-400 Firmware Update
Software ver.1.1” to your computer.
2.
Double-click the file you downloaded.
z Follow the instructions that appear on your computer screen.
To install from the CD-ROM (that comes with some projector models)
1.
Place the CD-ROM into your computer’s CD-ROM drive.
2.
On the menu screen that appears, click the [Open Folder] button to the right of
“Multi Projection Camera Update Software”.
z This will open the folder on the CD-ROM that contains the file named “YC-400.exe”.
3.
Double-click “YC-400.exe”.
z Follow the instructions that appear on your computer screen.
Note
Completing the above steps will create a file named “YC-400.bin” in the folder you specify.
For information about how to use the file to update the firmware version of a camera, refer to the
documentation below.
z “YC-400 Firmware Update Software ver.1.1”, which can be downloaded from the CASIO
website (page 8)
z “YC-Update_Guide_English.pdf”, which can be found in the “English” folder inside the “User’s
Guide” folder on the CD-ROM that comes with some projector models
To Next Page
Loading...
Need help?
General
