Why question marks appear in place of thumbnails on Casio XJ-H1650 Projector?
Question marks appearing in place of thumbnails on the Slide Mode file menu of your Casio Projector indicate that the images cannot be projected by Viewer.
What to do if [Reconnect] remains on the Wireless Connection 3 window and my computer won’t connect to the Casio XJ-H1650 Projector?
If the [Reconnect] status persists in Wireless Connection 3 and your computer fails to connect to the Casio Projector, consider the following: * Close any wireless LAN utilities other than Wireless Connection 3 that are running on your computer. * Ensure that the projector and computer are in close proximity and without obstructions. Move them closer or remove any walls or impediments. * Relocate any nearby devices that could interfere with the wireless LAN signal, such as microwave ovens or Bluetooth devices. * Verify that the projector is turned on and that its wireless adapter is properly connected. * Enable the computer’s wireless LAN function, ensuring it meets the minimum system requirements for Wireless LAN.
Why isn't the SSID of my Casio Projector showing up on the Projector List?
If the SSID of the projector you want to connect to isn't on the Projector List dialog box, check the “SSID Broadcast” setting on the projector. If it's set to “Disable”, change it to “Enable”. Also, make sure the projector is turned on.
Why can’t I change the SSID using the Wireless setup menu on my Casio XJ-H1650?
After assigning a new SSID to a projector using the System Admin page, you can no longer change the SSID using the projector’s remote controller. To change the SSID, log in to the System Admin page again.
What to do if I can connect wirelessly to my Casio XJ-H1650, but the computer screen won’t project?
If you have a wireless LAN connection between your Casio Projector and computer, but the computer screen isn't projecting, try these steps: * On the projector, press the [INPUT] key and ensure that “USB” is selected as the input source. * If “USB” is selected and the computer display still doesn’t project, click the button on the computer’s Wireless Connection 3 window. * If the projection image is frozen or blank, press the [ESC] key to cancel the freeze/blank operation.
Why ECA or PtG files do not appear in the file menu on Casio XJ-H1650 Projector?
If ECA or PtG files converted from PowerPoint files do not appear in the file menu on your Casio Projector, ensure that Viewer is in Presentation Mode. To enter Presentation Mode, highlight “Presentation” on the main Viewer window and then press the [ENTER] key.
What to do if I cannot play image files on Casio XJ-H1650 Projector?
If you cannot play image files you select on the Slide Mode file menu of your Casio Projector, the file you are trying to play may be corrupted. If you have the original file on your computer, check to see if it is normal. If it is, copy the original file to the memory device and try playing it again.
Why some USB devices are not recognized on Casio XJ-H1650 Projector?
If you have multiple devices connected to your Casio Projector via a USB hub or card reader, and some are not recognized, it's because the projector can only recognize up to four drives. Make sure that no more than four drives are connected at the same time.
How to fix Casio XJ-H1650 Projector when USB memory is not recognized?
If the Viewer doesn't appear when you connect a USB memory device to your Casio Projector, it might be due to a few reasons. First, the USB memory might be formatted in a way that the projector can't recognize. To fix this, connect the USB memory to your computer and check if its file system is FAT or FAT32. If it's not, reformat it to FAT or FAT32. Alternatively, try using a different USB memory device. Also, check the 'Plug and Play' setting in the projector's advanced settings, and ensure it is set to 'On'.
Why doesn't the user name appear when projecting from a computer with my Casio XJ-H1650 Projector?
If the user name isn't appearing when you start projecting from a computer, make sure that “On” is selected for the “Show User Name Display” item on the System Admin page “Setup” screen of your Casio Projector.
Details the key features and primary functions of the projector.
Lists and describes the keys on the remote controller.
Identifies and explains the buttons and indicators on the projector unit.
Guide on how to choose and switch between different input sources.
How to modify the brightness level of the projected image.
Guide on choosing between Auto, Manual, and Off settings for Eco Mode.
Details on the factory default password format and entry.
Precautions and notes related to the password protection feature.
Step-by-step instructions for changing the projector's password.
How to enable or disable the password protection feature.
What happens when the projector is turned on with password protection enabled.
How to reset settings for specific menu categories.
How to reset all projector settings to their factory defaults.
How to correct vertical distortion of the projected image.
How to select and adjust the image aspect ratio.
Information on power saving and noise reduction modes.
Information on setting up and using password protection for the projector.
How to clean the outer casing of the projector.
Proper method for cleaning the projector lens.
How to clean dust and debris from the projector vents.
How to control the projector using a computer over a network.
General| Contrast Ratio | 20000:1 |
|---|---|
| Light Source | Laser & LED Hybrid |
| Lamp Life | 20000 hours |
| Projection System | DLP |
| Throw Ratio | 1.5 - 1.8:1 |
| Projection Size | 30 - 300 inches |
| Input Connectors | HDMI, VGA, USB |
To Next Page
