To Next PageTo Next PageWhy image files do not appear in the file menu of Casio Projector?
If image files aren't showing up in the file menu of your Casio Projector, ensure that the Viewer is in Slide Mode by highlighting “Slides” on the main Viewer window and pressing the [ENTER] key. Also, check that the image files have the correct file name extensions: .jpg, .jpeg, .jpe, or .bmp.
Why does the wireless LAN connection between my Casio XJ-H1650 and computer keep dropping?
If your Casio Projector's wireless LAN connection keeps dropping, there are a few potential reasons: * Another wireless LAN utility besides Wireless Connection 3 might be running. Close any other such utilities. * The projector and computer may be too far apart, or there might be an obstruction between them. Try moving them closer or removing any obstacles. * Interference from other devices like microwave ovens or Bluetooth devices can disrupt the signal. Relocate these devices.
Why can't I access the System Admin page from Wireless Connection 3 on my Casio XJ-H1650 Projector?
If the System Admin page doesn't appear when accessed from Wireless Connection 3, the browser you're using might be configured to use a proxy server. Since this can prevent access, change your browser configuration.
Why doesn't the user name appear when projecting from a computer with my Casio XJ-H1650 Projector?
If the user name isn't appearing when you start projecting from a computer, make sure that “On” is selected for the “Show User Name Display” item on the System Admin page “Setup” screen of your Casio Projector.
What to do if the System Admin page doesn't appear when I enter the IP address of my Casio Projector?
If the System Admin front page doesn't appear when you enter the Casio Projector's IP address in your web browser: * Reconnect if the wireless LAN connection between the projector and computer has been terminated. * Disable any proxy server configurations in your browser.
How to fix slow projection image switching on a Casio XJ-H1650?
If the projection image switching on your Casio Projector is slow, you can try the following: * Check the projector’s “Projection Setting”. If “High-resolution” is selected, change it to “High-speed.” * If your computer is running Windows Vista or Windows 7, disable Windows Aero.
What to do if I get a “Could not connect to projector” error on my Casio XJ-H1650 Projector even after entering the login code?
If you receive a “Could not connect to projector. Connection has been terminated.” error after entering the login code, ensure the following: * If you're using two or three projectors, each must have a different SSID (e.g., casiolpj_default1, casiolpj_default2, casiolpj_default3). * If there are more than three projectors, each one needs a unique SSID.
Why doesn’t the Projector List dialog box display when Wireless Connection 3 is running on my computer for my Casio Projector?
If Wireless Connection 3 is running but the Projector List dialog box doesn't appear, ensure the following: * All projectors are turned on. A projector can be recognized even if “USB” isn't the selected input source. * All projectors have their wireless adapters connected. * The projectors and computer are close enough, without obstructions. Move them closer or remove any obstacles. * Relocate any nearby devices that may interfere with the wireless LAN signal, such as microwave ovens or Bluetooth devices.
What to do if I can connect wirelessly to my Casio XJ-H1650, but the computer screen won’t project?
If you have a wireless LAN connection between your Casio Projector and computer, but the computer screen isn't projecting, try these steps: * On the projector, press the [INPUT] key and ensure that “USB” is selected as the input source. * If “USB” is selected and the computer display still doesn’t project, click the button on the computer’s Wireless Connection 3 window. * If the projection image is frozen or blank, press the [ESC] key to cancel the freeze/blank operation.
Why can’t I change the SSID using the Wireless setup menu on my Casio XJ-H1650?
After assigning a new SSID to a projector using the System Admin page, you can no longer change the SSID using the projector’s remote controller. To change the SSID, log in to the System Admin page again.
General| Contrast Ratio | 20000:1 |
|---|---|
| Light Source | Laser & LED Hybrid |
| Lamp Life | 20000 hours |
| Projection System | DLP |
| Throw Ratio | 1.5 - 1.8:1 |
| Projection Size | 30 - 300 inches |
| Input Connectors | HDMI, VGA, USB |
Details the key features and primary functions of the projector.
Lists and describes the keys on the remote controller.
Identifies and explains the buttons and indicators on the projector unit.
Guide on how to choose and switch between different input sources.
How to modify the brightness level of the projected image.
Guide on choosing between Auto, Manual, and Off settings for Eco Mode.
Details on the factory default password format and entry.
Precautions and notes related to the password protection feature.
Step-by-step instructions for changing the projector's password.
How to enable or disable the password protection feature.
What happens when the projector is turned on with password protection enabled.
How to reset settings for specific menu categories.
How to reset all projector settings to their factory defaults.
How to correct vertical distortion of the projected image.
How to select and adjust the image aspect ratio.
Information on power saving and noise reduction modes.
Information on setting up and using password protection for the projector.
How to clean the outer casing of the projector.
Proper method for cleaning the projector lens.
How to clean dust and debris from the projector vents.
How to control the projector using a computer over a network.
