35
To display the Viewer setup menu
Perform either of the following operations.
Operation 1
1.
Project the main Viewer window.
z If you are playing a file in the Presentation, Slide, or Movie Mode, pause playback and return
to the file menu. Next, press [FUNC], then [T], then [ENTER].
2.
Use the cursor keys to move the highlighting to “Viewer Setup” and then press
the [ENTER] key.
Operation 2
1.
While the Viewer is being projected, press the [MENU] key.
z If you are playing a file in the Presentation, Slide, or Movie Mode, pause playback before
pressing the [MENU] key.
2.
Use the [T] key to move the highlighting to “USB” and then press the [ENTER]
key.
3.
Use the [T] key to move the highlighting to “Setup” and then press the [ENTER]
key.
To Next Page
Loading...
Need help?
General
