36
To configure Viewer settings
1.
Display the Viewer setup menu.
2.
Use the [T] and [S] keys to move the highlighting to the item whose setting you
want to change.
3.
Use the [W] and [X] keys to display the available settings.
4.
After configuring all the settings you want, press the [ESC] key (or press the
[FUNC] key and then the [ENTER] key).
z This will return to the main Viewer window.
To return Viewer settings to their initial defaults
1.
Display the Viewer setup menu.
2.
Use the [T] key to move the highlighting to “Initialize Viewer Setup” and then
press the [ENTER] key.
z This will cause a “Do you want to restore defaults for the Viewer setup?” confirmation dialog
box to appear.
3.
Use the [S] key to move the highlighting to “Yes” and then press the [ENTER]
key.
z This will return Viewer settings to their initial factory defaults.
z For information about the Viewer initial factory default settings, see “Configuring Viewer
Settings” (page 34).
To Next Page
Loading...
