Casit KEQS08 - 6.2 Time learning PARTIAL OPENING; 6.3 Time learning: pause (easy way)

To Next Page

To Previous Page

The gate is in closed position

Press and keep pressed the TIMES button till the

control board starts motor in OPEN,

then release the TEMPI button

Motor OPENS

2 Press the TEMPI button Motor STOPS

Let the pause time run for the PARTIAL OPENING

3 Press the TEMPI button Motor CLOSES

Push the button TEMPI

(if the closing limit switches is not available)

Motor stops. The door is closed.

Operation completed

4 a

... If the limit switch is available wait until the

motor (partial opening use) stops

Motor stops by closing limit

switches. The door is closed.

Operation completed

6.2 Time learning PARTIAL OPENING

TEMPI

-15-

KEQS08

Technical Manual

6.3 Time learning: pause (easy way)

The gate is in PAUSE

1 Press and release the TEMPI button

The L.E.D. lights for opening and

closing are LIT ON

Let the new pause time run…

2 Press and release the TEMPI button

The gate CLOSES.

Time learning completed

TEMPI