Casper ADJUSTABLE - User Manual

Questions and Answers

M
Matthew ButlerJul 27, 2025
What to do if no features of my Casper ADJUSTABLE bed activate?
- D
  Derrick RuizJul 27, 2025
  If no features of your Casper Indoor Furnishing bed activate, there might be a few potential causes: * Check the outlet by plugging in another working appliance to ensure it is functioning correctly. * A defective surge protection device or electrical outlet could be the issue, so testing the outlet is essential. * Verify the electrical circuit breaker box to ensure it hasn't tripped.
J
Jake ScottAug 1, 2025
What to do if the Casper ADJUSTABLE remote control illuminates but the bed doesn't respond?
- E
  Ernest SavageAug 1, 2025
  If your Casper Indoor Furnishing remote control illuminates but the bed doesn't respond, the issue might be with the electronic components, a defective surge protection device, the electrical outlet, or a tripped circuit breaker. Try the following: * Re-link the remote control. * Test the outlet by plugging in another working appliance. * Check the electrical service breaker box to verify it hasn't tripped.
S
Sarah BrooksAug 7, 2025
Why won't my Casper ADJUSTABLE Indoor Furnishing head section return to the flat position?
- R
  Robert ReevesAug 7, 2025
  If the head section of your Casper Indoor Furnishing elevates but doesn't return to the horizontal position, it could be due to: * An obstruction in the base mechanism. Elevate the base and check for any obstructions, then remove them. * Insufficient distance between the headboard brackets and the mattress. Verify the distance and adjust if needed.
B
Brandon CoxAug 11, 2025
What to do if my Casper Indoor Furnishing remote control will not illuminate?
- T
  tanya03Aug 11, 2025
  If your Casper Indoor Furnishing remote control will not illuminate, replace the batteries in the remote control.
D
Daniel PrestonAug 17, 2025
How to stop my Casper ADJUSTABLE remote from interfering with other devices?
- C
  Christopher WalkerAug 17, 2025
  To stop your Casper Indoor Furnishing remote from interfering with other devices: * Lift the battery cover on the remote and remove the yellow sticker to expose the DIP switches. * Slide the switches to different positions.
K
kennedydanielAug 22, 2025
What to do if my Casper ADJUSTABLE Head or Foot Lift Function has minor interference during operation?
- H
  Heather AndrewsAug 22, 2025
  If your Casper Indoor Furnishing Head or Foot Lift Function experiences minor interference during operation: * Check the batteries in the remote and replace them if necessary. * Ensure you are following the duty cycle of the motor. * Press the lift buttons squarely and accurately. * Refer to the Linking the Remote section in case the control box is experiencing common Radio Frequency Interference from other radio transmitting devices.