INTRODUCTION
Castel MAC S.p.A. would like to thank you for having chosen its products and we are sure that you will
be more than satisfied with their performance.
To help maintain efficiency and performance in time, Castel MAC S.p.A. have prepared this manual that
describes the correct use and maintenance of the Blast Chiller Freezer.
TYPE OF USE AND LIMITATIONS
This Blast Chiller Freezer has been designed for chilling and preserving food (it rapidly lowers the tem-
perature of cooked food in this way preserving quality and guaranteeing freshness for several days). Any
other use is considered improper and incorrect.
This Chiller cannot be installed outside and or in environments subject to weather conditions.
The manufacturer declines all responsibility for uses other than those given in this manual.
TESTING
The Chiller is dispatched only after it has been tested (visual inspection – electric test – functional test).
Final testing is certified, for the relevant documentation please refer to the enclosed appendixes.
GENERAL SAFETY STANDARDS
The Chiller in question is manufactured conforming with the European Directives relevant to low tension
73/23-93/68/EEC, and electromagnetic compatibility 89/336/EEC; EN60335- 1, EN60335-2-24,
EN55014, EN61000-3-2, EN61000-3-3, EN55104.
WHAT THE CUSTOMER MUST PROVIDE ON SITE LOCATION
It is necessary that there is an earthed power socket suitable for the electrical input indicated on the
metal plate, a thermomagnetic switch with at least a 3 mm break contact.
TECHNICAL ASSISTANCE
Thanks to the network of concessionaires and authorised service centres, Castel MAC S.p.A. guaran-
tees its customers an after-sales service.
CAUTION: The T3 Chiller must be powered by a single phase power supply (230 V – 50 Hz).
Make sure it is level and always use qualified personnel to install, repair and service your Chiller.
2
To Next Page
Loading...