Castles Technology UPT1000F - Factory Reset

Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 20
3.7. Factory Reset
Perform factory reset, all user application, fonts and data will be deleted.
System Menu
 Press [6] button to enter Factory Reset menu.
 Press [OK].
 Enter password and press [OK].
 Enter factory reset password.(Default password: 8418)
 Start erasing, and then go back to Program Manager.
System Menu
1.Download AP
2.System Info
3.Memory Status
4.Sys Settings
5.Test Utility
6.Factory Reset
7.Power Off
FacRestPassword
Enter Password:
****
Erasing…
FacRest Password
Enter Password:
****
FacRest Password
OK to reset?