Cateye Ergociser EC-5000 Service Manual
3
How to Use This Service Manual
How to Use This Service Manual
The manual consists of Part A, Part B and Part C. Part A refers to trouble-shooting which allows you to
identify the cause and areas to be fixed depending on typical symptoms. Part B shows how to repair and/
or adjust specific defects. This part contains sections; How to Repair Electrical Parts [ES] and How to
Repair Mechanical Parts [MS].
Part C lists up all genuine parts and corresponding parts numbers that will be necessary for replacement
or stock.
Whenever any problem has occurred on the main unit, take the following actions to repair or adjust it.
Before taking these actions,please always put on gloves and be sure to refer to and understand the
corresponding work procedures.
1. Check and identify the cause by referring to Part A.
2. Identify the part name by referring to Name of Parts.
3. Perform repair or adjustment in accordance with the instructions in Part B.
4. Replacement, if required, should be done by using genuine parts as specified in Part C.
To Next Page
Loading...