Rev 6 – Feb 2022
Page 26 of 44
The files are named based on the equipment used and a unique identifier. The ‘H’ at the start
indicates that the data is from the Hexcorder Pro. Then the next 4 numbers are the last 4 digits of the
serial number to indicate the unit generating the file. Survey data files have the word DATA after
the serial number designator, Scope readings have the letters ACSM in the file name. The last part
of the name is a sequential number.
Copy and paste data files to your PC and open them in Excel or an equivalent spreadsheet program.
The files are a standard Comma Separated Value (CSV) file, which can be imported into many third-
party data management programs.
To Next Page
Loading...