Rev 6 – Feb 2022
Page 4 of 44
Welcome
Thank you for selecting the Hexcorder Pro CIPS and DCVG survey instrument.
The Hexcorder Pro utilizes GPS for synchronization with current interrupters and other data logging
equipment. This ensures that everything happens at the same time no matter how far apart
equipment is or how long it has been out in the field. GPS coordinates are logged for each reading
and stored to memory.
Open and inspect your Hexcorder Pro upon receipt. If any damage occurred during shipping, file a
claim with the carrier immediately.
The Hexcorder Pro comes complete with:
• Hexcorder Pro on mounting
plate with GPS antenna
• Rugged Zebra/Xplore* Android
tablet (if ordered)
• Wire dispenser/chainage counter
assembly, either hip pack or
back pack
• Hexcorder Pro to wire dispenser
cable (attached to back pack or
in the box for hip pack)
• Battery charger
• 2 x Cu/CuSO
4
half cells
• 2 x half cell extension poles
• 2 x Hexcorder Pro to survey pole
cables
• Spool of 32AWG survey wire
• 4 point harness
• Hip pack strap (if applicable)
• Carrying case
• Mini USB cable
• Operation manual
*As of August 2020, all Hexcorder Pro units come with the new rugged Zebra L10
Android tablet.
To Next Page
Loading...