【Wi-Fi Connection】
Activate/Zeroing Program(It must be operated under the condition that there is no cat litter in the ball cabin
and the waste box is empty).
*After the machine is powered on, the Start indicator flashes and the ball cabin does not rotate. Press and
hold the Mode button, then after hearing a beep twice, release the button to activate the zeroing
program(After the zeroing program is activated, the machine starts self-checking).
Download the CATLINK in the application market of your phone after the self-checking (lasting for 2
minutes) is ended.
Connect your phone to 2.4GHz WiFi, it does not currently support 5GHz and WiFi that requires special
certification.
Note: Name of WiFi cannot contain Chinese, spaces, or special characters, so as not to affect the WiFi
connection.
Open the CATLINK to register and log in. Find and click "Add Device" -> "AI Litter Box" and follow the instruc-
tions.
*Please authorize location information. Android need to turn on GPS.
Press and hold the Mode button and the Clean/Pause button at the same time until you hear the second
beeping sound. Then, the Wi-Fi connection indicator will blink, showing the device is ready for network
configuration.Use CATLINK to configure the network.
*Please keep the AI litter box as close as possible to the router.
p12
1
2
3
4
5
To Next Page
Loading...
