• The spin speed will gradually reduce each time the spin button is pressed at 100r.p.m intervals to a minimum of
400 r.p.m
No spin
• Press the spin button again to get to the no spin option and the display will show “0”.
• A programme without a final spin is used to prevent creasing when washing special fabrics.
Anti-Crease option
• Pressing the spin button again will select the anti-crease option.
• The wash programme stops on the last rinse, with the clothes left in water.
• When the option is deactivated, the washing machine continues the programme, draining and spin-drying.
• It is used for example when you are not at home and want to delay the spin drying until you get in to prevent the
clothes creasing after spin drying and being left in the drum to be removed.
Delay timer
Delay timer selection button
• A delay of up to 24 hours can be selected. The delay must be selected after choosing the wash programme.
• To set the required delay, press the delay timer button. Each time the button is pressed the delayed start of
washing is increased by one hour.
Cancelling the delay
• To cancel the delay, press the delay timer button repeatedly to cycle through the full 24 hours and then press
again.
• The delay will be cancelled when 24 hours have been reached and the button is pressed once more. If the
programme is changed the delay is also cancelled.
Additional functions
• Additional function selection button depending on programmes. There are 3 options: easy iron, extra rinse and
intensive wash.
• Press the button and the desired option will be displayed.
• By pressing the button several times you can choose between several combinations of one, two and up to three
additional functions at the same time depending on the programme selected.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
