CDA ci325

Questions and Answers:

B
bradyashleyAug 14, 2025
What to do if my CDA ci325 doesn't fill with water?
- A
  Alexander WrightAug 14, 2025
  If your CDA Washer isn't filling with water, there could be several reasons. First, make sure you've pressed the “Start / Pause” button. Check that the water tap is turned on and that the water pressure is adequate. Inspect the inlet hose for any kinks. Ensure there isn't a water supply failure. Verify that the programme knob is correctly set and the washer door is properly closed. Lastly, check if the inlet hose filter is blocked and unblock it if necessary.
D
Dominique LesterAug 17, 2025
How to stop my CDA ci325 Washer from vibrating?
- S
  Scott PhamAug 17, 2025
  If your CDA Washer is vibrating excessively, start by checking if all the transit bolts have been removed. Make sure the machine is on an even surface and correctly leveled. Avoid overloading the washing machine, and ensure clothes are loaded evenly. Confirm that the washing machine isn't leaning on any solid object.
M
Mallory JimenezAug 20, 2025
What to do if my CDA ci325 Washer does not drain water?
- A
  amurrayAug 20, 2025
  If your CDA Washer is not draining water, examine the drain hose for any obstructions or bends. Also, make sure that the pump filter is clean and free from obstructions. Install the drain hose at a height between 80-100cm.
M
Melissa MilesAug 25, 2025
How to reduce foam in my CDA ci325?
- D
  Debra HenryAug 25, 2025
  If you notice excessive foam in the drum of your CDA Washer, it could be due to the type or amount of detergent you're using. Verify that the detergent is a low foaming type suitable for washing machines. Also, reduce the amount of detergent used per wash.
R
Ralph JonesAug 27, 2025
Why is my CDA ci325 not spinning?
- A
  andrewsjohnAug 28, 2025
  If your CDA Washer fails to spin, it might be due to an unbalanced load. Try adding more clothes to balance the load, or try running the spin cycle again.
K
kimvelezAug 31, 2025
Why won't my CDA Washer start?
- S
  Stacey FisherAug 31, 2025
  There are several potential reasons why your CDA Washer might not start. First, ensure the washer is properly plugged into the socket. Check the fuse to see if it's damaged and replace it if necessary. Verify that there are no issues with the power supply. Make sure the washer door is completely closed. Finally, confirm that you've pressed the “Start / Pause” button.
R
Reginald HesterSep 2, 2025
Why is my CDA ci325 draining while being filled?
- G
  Glen NelsonSep 3, 2025
  If your CDA Washer is draining while filling, it's likely due to the drain hose being positioned incorrectly. Ensure the drain hose is installed at the specified height of 80-100cm. Also, check that the end of the drain hose is not immersed in water.
W
William WashingtonSep 6, 2025
Why does my CDA ci325 Washer stop mid cycle?
- C
  Christopher HarperSep 6, 2025
  If your CDA Washer stops before completing its wash cycle, check the power and water supplies to ensure there are no interruptions.
M
Michael EscobarSep 9, 2025
What to do if my CDA ci325 operation stops?
- J
  Jeanette ContrerasSep 9, 2025
  If your CDA Washer operation stops for a period of time, check the display for any error messages. If the washing machine is in a soaking cycle, press the “Rinse Hold” button or the “Start / Pause” button again to cancel it.

CDA ci325 Specifications

General

Door color	Silver
Door hinge	Left
Control type	Buttons, Rotary
Display type	LED
Loading type	Front-load
Drum material	Stainless steel
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drum capacity	6 kg
Spin-drying class	B
Maximum spin speed	1200 RPM
Noise level (spin)	75 dB
Noise level (wash)	57 dB
Number of washing programs	11
Washing class	A
Annual water consumption washing	11003 L
Annual energy consumption washing	166 kWh
Current	13 A
Power consumption (typical)	2000 W
Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh