14
• Once the required time delay is shown on the display, the washing
machine will set after approximately three seconds delay.
Extra rinse
This function adds up to 3 extra rinse cycles to the programme,
which is ideal for large loads and garments belonging to people
with sensitive skin. Please note: this function will increase the water
consumption.
Press the “Extra Rinse” button once to select one extra rinse, the
display will show “P--1”.
Press the “Extra Rinse” button again to select 2 extra rinses, the
display will show “P--2”, a further press of the “Extra Rinse” button
selects the maximum of 3 extra rinses with the display showing “P--3”.
The “Extra Rinse” light is illuminated and flashes during the
programme, “P--1/2/3” is displayed, alternating with the remaining
programme run time.
Intensive
Pressing the “Intensive” button before starting a programme selects
this function. This increases the washing time during the main wash
stage of the programme and is ideal for washing dirty loads.
Rinse hold
This function pauses the programme before the final rinse water is
set to drain. This holds the clothes in water to prevent creasing. The
indicator will flash when the rinse hold function is in progress. To start
the final spin cycle, press the rinse hold button again. The indicator
will switch o and the final spin programme will start.
To Next Page
Loading...
