CDA ci925 - User Manual

Questions and Answers

T
Tracy JohnsonAug 15, 2025
What to do if my CDA ci925 Washer doesn't fill with water?
- A
  Ashley MorenoAug 15, 2025
  If your CDA Washer isn't filling with water, there could be several reasons. First, make sure you've pressed the “Start / Pause” button. Check that the water tap is turned on and that the water pressure is adequate. Inspect the inlet hose for any kinks. Ensure there isn't a water supply failure. Verify that the programme knob is correctly set and the washer door is properly closed. Lastly, check if the inlet hose filter is blocked and unblock it if necessary.
R
Robert HarringtonAug 18, 2025
How to stop my CDA ci925 from vibrating?
- T
  Tammy PerezAug 18, 2025
  If your CDA Washer is vibrating excessively, start by checking if all the transit bolts have been removed. Make sure the machine is on an even surface and correctly leveled. Avoid overloading the washing machine, and ensure clothes are loaded evenly. Confirm that the washing machine isn't leaning on any solid object.
R
Rebecca SimmonsAug 21, 2025
What to do if my CDA ci925 does not drain water?
- M
  Michelle AdamsAug 21, 2025
  If your CDA Washer is not draining water, examine the drain hose for any obstructions or bends. Also, make sure that the pump filter is clean and free from obstructions. Install the drain hose at a height between 80-100cm.
W
willisjennaAug 25, 2025
How to reduce foam in my CDA ci925?
- T
  Tammy BowenAug 25, 2025
  If you notice excessive foam in the drum of your CDA Washer, it could be due to the type or amount of detergent you're using. Verify that the detergent is a low foaming type suitable for washing machines. Also, reduce the amount of detergent used per wash.
J
julie52Aug 28, 2025
Why is my CDA Washer not spinning?
- A
  Alexis JenkinsAug 28, 2025
  If your CDA Washer fails to spin, it might be due to an unbalanced load. Try adding more clothes to balance the load, or try running the spin cycle again.
A
Ashley HansenSep 1, 2025
Why won't my CDA ci925 Washer start?
- A
  adamsamberSep 1, 2025
  There are several potential reasons why your CDA Washer might not start. First, ensure the washer is properly plugged into the socket. Check the fuse to see if it's damaged and replace it if necessary. Verify that there are no issues with the power supply. Make sure the washer door is completely closed. Finally, confirm that you've pressed the “Start / Pause” button.
C
contrerasreginaSep 3, 2025
Why is my CDA Washer draining while being filled?
- K
  Keith WallaceSep 4, 2025
  If your CDA Washer is draining while filling, it's likely due to the drain hose being positioned incorrectly. Ensure the drain hose is installed at the specified height of 80-100cm. Also, check that the end of the drain hose is not immersed in water.
M
Madison BrownSep 7, 2025
Why does my CDA Washer stop mid cycle?
- M
  Michael SimmonsSep 7, 2025
  If your CDA Washer stops before completing its wash cycle, check the power and water supplies to ensure there are no interruptions.
A
Amanda ThompsonSep 12, 2025
What to do if my CDA Washer operation stops?
- J
  joshua25Sep 12, 2025
  If your CDA Washer operation stops for a period of time, check the display for any error messages. If the washing machine is in a soaking cycle, press the “Rinse Hold” button or the “Start / Pause” button again to cancel it.

Summary

Washer Dryer Operating Guide

Garment Preparation and Detergent Use

Guide to preparing clothes, sorting, and using the detergent dispenser correctly.

Control Panel and Programme Selection

Overview of the control panel and step-by-step instructions for selecting wash programmes.

Wash Programme Settings and Options

Details on selecting programmes, spin speed, temperature, and delay timer functions.

Advanced Wash Functions

Explanation of extra rinse, intensive wash, drying, and start/pause features.

Washing Machine Programme Overview

Summary table detailing all available wash programmes and their respective options.

CDA ci925 Specifications

General

Door hinge	Left
Control type	Buttons, Rotary
Display type	LED
Loading type	Front-load
Drum material	Stainless steel
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Drying capacity	3 kg
Washing capacity	6 kg
Spin-drying class	-
Maximum spin speed	1200 RPM
Noise level (spin)	76 dB
Noise level (wash)	59 dB
Noise level (drying)	58 dB
Washing class	A
Connected load	2000 W
Water consumption washing per cycle	- L
Energy consumption washing per cycle	0.98 kWh
Water consumption washing & drying per cycle	108 L
Energy consumption washing & drying per cycle	4.85 kWh

Weight and Dimensions

Depth	520 mm
Width	595 mm
Height	825 mm

Related product manuals