29
installed on a flat, non-slippery and solid
surface.
The machine must be positioned on a
solid support, such as the bare floor or
a well-fitting riser, ensuring the machine
is unable to fall when subjected to
the typical vibrations generated by a
washing machine.
Levelling
To reduce the noise from the washing
machine and to prevent unnecessary
movement during use, ensure the
washing machine is level, using the
adjustable feet.
First, fix and level the rear feet. When
they are properly fixed, secure the
metal locknut tightly against the
underside of the washing machine.
• Put the washing machine into its
required position.
• Then level the front feet in the same
way as the rear feet.
Please note: Raising the washing
machine too high can aect the
stability of the appliance.
g. 9
To Next Page
Loading...
