12
Electrical information
Mains electrical voltage: 230 – 240Vac
Total rated power consumption: 146W
Troubleshooting
Please note:
Your extractor is equipped with a motor protection device that will
switch o the motor to prevent damage from overheating. This may
happen during cooking when most or all of the zones/burners are
being used simultaneously, or if your extractor is installed incorrectly,
lower than the recommended height.
This is normal, and the extractor will work again once the motor has
cooled suciently.
If your extractor is not working
1. Check that the mains supply has not been switched o.
2. Check that the fuse in the spur has not blown.
3. Contact CDA Customer Care
To Next Page
Loading...
Need help?
General
