8
To remove the grease filter
To remove the grease filter, push in the button on the handle and then
pull down on the filter at the front as shown in figure 2. When you
have released it at the front, then you can pull the filter out completely.
Please note:
Cleaning the grease filter in the dishwasher may lead to
discolouration. This is normal and does not constitute a fault with the
appliance.
Changing the charcoal filter (re-circulating only)
To ensure best performance of your extractor, you should replace the
charcoal filters every four to six months, depending on use. To attach
a new charcoal filter, first remove the grease filter as described above.
Then oer up the charcoal filter to the side of the motor as shown in
figure 3 and turn it clockwise until it locks into place.
To Next Page
Loading...
Need help?
General
