3
Using your Extractor
For best performance, you should switch on the extractor 15 minutes before starting to cook and leave it to run for approximately
15 minutes after the end of cooking.
Control Panel
A - Power off button
B - Speed level buttons
C - Light button
To switch the extractor light on or off
• Press button C.
To switch on the extractor or to change the speed at any time when the extractor is running
• Press the relevant B button for the first, second or third speed level as required.
To switch the extractor off
• Press the A button.
Fig. 1
A B C
To Next Page
Loading...
