CDA EVP6 User Manual

5
To switch on the extractor
• Touch either key “B” or “D”. The appliance will switch on at the first
speed.
• To increase the speed touch key “D”.
• To switch the extractor o, touch and hold key “B” for two seconds
when the extractor is working at higher speeds, or touch key “B” at
speed one.
The intensive function
• The extractor is equipped with an intensive function which runs for
ten minutes before returning to the previous selected speed. To
activate the intensive function, touch key “D” at speed three. The
display will blink whilst the intensive function is on.
The timer
• The extractor is equipped with a timer that allows the extractor to
run for 15 minutes before switching o automatically.
• To activate the timer, touch key “E”. The display will flash a decimal
point when the timer is on. Please note: The timer cannot be
activated when the intensive function is on.
The clean air function
• The extractor is equipped with a clean air function that switches on
the motor for ten minutes every hour at speed one.
• To activate the clean air function, touch key “E” for two seconds
when the appliance is o. To return to normal function, touch
either key “B” or “D”. To switch o the clean air function, touch
key “E”. The display “C” will light up in sections whilst the motor is
running, and will show the letter “C” during the fifty minutes when
the motor is not running.

CDA EVP6 Specifications

General

Brand	CDA
Model	EVP6
Category	Ventilation Hood
Language	English