8
C
D
Fig. 4
Changing the Light
DO NOT CHANGE THE LIGHT BULB
IMMEDIATELY AFTER USE AS THE
BULB WILL BE HOT. ALLOW IT TO
COOL BEFORE REMOVING IT.
Unscrew the light bulb cover, see fig. 4.
Unscrew the light bulb and replace with
a 12V 20W halogen light bulb. Finally,
replace the light bulb cover.
Do not touch bulbs or adjacent areas during or straight after
prolonged use of the lights.
The light is designed for use during cooking and not for general
room illumination. Extended use of the light can reduce the life span
of the bulb.
Bulb replacement is not covered by the guarantee.
Only use bulbs recommended for your extractor. Do not fit bulbs of a
higher power rating.
Bulbs of a lower power rating may be adequate for use, generally
last longer and use less energy.
To Next Page
Loading...
Need help?
General
