26
Electrical Information
Mains electrical voltage: 230 – 240Vac.
Total rated power consumption EVX100: 382W.
Troubleshooting
Please note:
Your extractor is equipped with a motor protection device that will
switch o the motor to prevent damage from overheating.
This may happen during cooking when most or all of the zones/
burners are being used simultaneously.
This is normal, and the extractor will work again once the motor has
cooled suciently.
If your extractor is not working:
1. Check that the mains supply has not been switched o.
2. Check that the fuse in the spur has not blown.
Contact CDA Customer Care
A : Customer Care Department, The CDA Group Ltd, Harby Road,
Langar, Nottinghamshire, NG13 9HY
T : 01949 862 012
F : 01949 862 003
E : service@cda.eu
W : www.cda.eu
To Next Page
Loading...
