EasyManuals Logo

CDA FW951 User Manual

CDA FW951
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
Before first use
You must allow the fridge to settle for at least twenty four hours
prior to switching the power on.
It is recommended that you clean the interior of the appliance prior to
first use, using a solution of bicarbonate of soda and warm water and
then thoroughly drying the interior.
The fridge may have an odour to it at first use. This will disappear as
the appliance cools.
Please note:
The appliance will work continuously until it comes down to the
correct temperature.
The temperatures are preset at the factory to 5 for the fridge and -18
for the freezer.
It takes two to three hours for the fridge and freezer to reach
temperatures appropriate to store food.
If the appliance is switched o, you should allow five minutes
before switching it on again to prevent unnecessary damage to the
compressor.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CDA FW951 and is the answer not in the manual?

CDA FW951 Specifications

General IconGeneral
Child lock-
Door hingeRight
Product colorWhite
Built-in displayNo
Reversible doorsYes
Shelves materialTempered glass
Appliance placementBuilt-in
Noise level39 dB
Total net capacity232 L
Total gross capacity254 L
Fridge net capacity148 L
Fridge door balconies3
Fridge gross capacity151 L
Fridge number of shelves/baskets5
Star rating4*
Freezer positionBottom-placed
Freezing capacity10 kg/24h
Freezer net capacity84 L
Freezer gross capacity103 L
Freezer number of shelves/baskets4
Storage time during power failure- h
Connected load- W
Annual energy consumption313 kWh
Weight and Dimensions IconWeight and Dimensions
Depth540 mm
Width555 mm
Height1780 mm

Related product manuals