11
Care and Maintenence
As the hob has a stainless steel or enamel surface, you should use a
nonabrasive cleaner. Any abrasive cleaner (including Cif) will scratch
the surface and could erase the control panel markings. Stainless
steel can be eectively cleaned by simply using a dilute solution of
water and mild detergent and drying to a shine with a clean cloth.
Over time with use, the stainless steel surface may discolour; this is
normal and does not constitute a fault with this appliance. Proprietary
stainless steel cleaners are available.
IMPORTANT:
•Steamcleanersmustnotbeusedwhencleaningthisappliance.
•Ensurethatallpartsarecorrectlyreplacedaftercleaning,before
attempting to use the hob.
•Afterremovingthepanstands,ensuretherubberpadsareinplace
on the base of the pan stand before repositioning the pan stands
straight and level on the hob.
What to do if you smell gas:
1. Open doors and windows
2. Turn the gas supply o
3. Call TRANSCO on : 0800 111 999
To Next Page
Loading...
