12
Small object safety
Anything left on the control panel (e.g. cutlery or towels) will cause
the hob to switch o automatically and there will be a beep every ten
seconds until the obstruction is removed.
Temperature limiter
The hob is equipped with a temperature limiting sensor that will switch
o the zone and show “C” alternating with the power level in the zone
display until the hob temperature is within the limits preset.
Pan detection
The hob is equipped with a sensor that will advise when the pan is
removed from the zone, or is unsuitable for use on induction hobs.
The zone display will show “U” alternating with the power level until
a suitable pan is placed on the zone. The zone will switch o after
approximately one minute if no suitable pan is placed on the zone.
To Next Page
Loading...
Need help?
General
