20
Power Conguration
This hob can be connected to a 13, 16, 25 or 32Amp supply and
configured to work on any of these power settings.
If the hob is connected to a 32Amp supply all four zones can be used
on the maximum setting with boost at the same time. If, however,
the hob is connected and configured to a 13Amp supply and all four
zones are selected at the same time the hob will limit the maximum
power consumed so that the 2.8kW power supply cannot be
exceeded.
To congure the hob (at rst switch on)
1. Touch the
to switch o the childlock.
2. Touch the “+” and “-” keys for the front left and right zones
simultaneously.
3. Touch the front left zone “-” key to cycle through the options.
The displays will show:
4. Touch the plus and minus keys for the front left and right zones
simultaneously to confirm the setting.
All displays will show “8” and then switch o. The childlock will be
switched back on automatically, and the hob is now configured ready
for use.
Front left zone display Timer display Front right zone
display
Power Settings
2 PO 8 2.8 kW
3 PO 5 3.5 kW
6 PO 0 6.0 kW
7 PO 2 7.2 kW
To Next Page
Loading...
Need help?
General
