30
Changing the oven light
1. Disconnect the electrical power supply (for example, by switching off the main power
switch).
2. Unscrew the light cover
3. Fit a new bulb.
4. Refit the cover.
Note:
Use only bulbs designed to resist up to 300°C with the following characteristics: 15 W,
230 V, type E-14.
Assembling and
dismantling of the side
runner frames
– Fit the side runner frames into the holes
on the side walls inside the oven
(Fig. 29).
– Slide the tray and rack into the runners
(Fig. 20).
– To dismantle, operate in reverse order.
Fig. 29
Fig. 30
Inside of oven
This must be cleaned regularly.
Remove and refit the side runner frames
as described in the next chapter.
With the oven warm, wipe the inside
walls with a cloth soaked in very hot
soapy water or another suitable product.
Side runner frames, tray and rack can be
removed and washed in the sink.
To Next Page
Loading...
Need help?
General
