26
Troubleshooting
If any of the above steps do not resolve your issue, please contact
CDA Customer Care to arrange a repair. Contact details are below.
Please have to hand all the details from your appliance’s rating plate
which can be found on the back of the oven and/or on the back of the
instruction manual/warranty card.
Important: All repairs must be carried out by qualified service
technicians.
Contact CDA Customer Care
A: Customer Care Department, The CDA Group Ltd, Harby Road,
Langar, Nottinghamshire, NG13 9HY
T: 01949 862 012 F: 01949 862 003
E: customer.care@cda.eu W: www.cda.eu
Problem Potential cause Potential remedy
The appliance does not work No power Check the fuse, replace if blown.
Oven lighting does not work. Loose or damaged bulb Replace the blown bulb (see
page 21).
Check the mains supply is on.
Oven is not heating
Temperature has not been set Set the desired temperature
using the temperature knob.
The cooling fan does not work
on a heated function
Risk of overheating! Unplug the appliance or switch
at the
mains isolator. Contact CDA Customer Care.
If the programmer shows 12:00
(or 12:01 etc.) then the current
time has not been set.
Set the current time as per page
13.
To Next Page
Loading...
Need help?
General
