CDA SK510 Single - Programming the Oven

18
Programming the Oven
Memory Function
The memory function can be used to save a setting that you frequently
use.
To save a setting into memory
• Select the oven function and temperature.
• While the display is still flashing, touch and hold the “Memory” key
until the oven beeps.
To run the stored function from memory
• Use the On/O key to switch the oven on.
• Touch the “Memory” key
to call up and run the function.
Note: If a new setting is saved into memory it automatically replaces
the previous one in there.
Setting the clock
The clock is preset to 00:00, and will revert to this after a power
failure.
To change the clock time
• Ensure the oven is in standby mode.
• Touch the “Clock” key
twice, so the “Clock” symbol
flashes.
• While the “Clock” symbol
is still flashing, use the “+” or “-” keys to
scroll the display to the required time.
• While the “Clock” symbol is still flashing, touch the “Clock” key
once to confirm the setting.