Why won't my CDA WC370 programme start?
The programme might not start because of several reasons: * Check the plug, fuse, and circuit breakers of the mains supply. * Ensure the water tap is turned on. * Make sure the dishwasher door is fully closed. * Check if the water inlet filter or the machine filters are blocked.
What to do if water remains in my CDA WC370 after the programme ends?
If water remains in your CDA dishwasher after a cycle, it could be due to: * A blocked or kinked water drain hose. * Blocked filters.
What to do if the waste water in my CDA Dishwasher can not be discharged?
If the waste water in your CDA dishwasher cannot be discharged: * The drain hose may be blocked. * The filters of your machine might be blocked. In such case, restart the dishwasher and cancel the programme. If the error continues, contact CDA service.
Why aren't the dishes dry after a CDA WC370 programme?
If dishes aren't drying in your CDA dishwasher, consider these possibilities: * You may have selected a programme without a drying stage. * The rinse aid setting could be too low. * You might be unloading dishes too soon; allow time for drying.
What to do if my CDA Dishwasher shows a continual fill error?
If your CDA dishwasher shows a continual fill error, close the tap and contact CDA service.
Why is the door of my CDA WC370 Dishwasher not opening or closing properly?
If the door of your CDA Dishwasher isn't working properly, it may be because the door tension is not correctly adjusted for the decor door.
What to do if my CDA WC370 has inadequate water supply?
If your CDA dishwasher isn't getting enough water, first ensure that the water tap is fully open. If that doesn't work, close the tap, detach the water inlet hose, and clean the filter. Then, restart the dishwasher. If the issue persists, further assistance may be needed.
Why the waste water cannot be discharged from CDA WC370 Dishwasher?
If the waste water isn't being discharged from your CDA dishwasher, it might be due to a blocked drain hose or blocked filters. To resolve this, restart the dishwasher and cancel the current program. If the error continues after these steps, further assistance may be needed.
Why does my CDA Dishwasher stop mid-programme?
Your CDA dishwasher might halt mid-cycle due to: * A power failure. * A water inlet failure. * The programme being on standby.
What to do if the alarm is active against water overflow in my CDA WC370 Dishwasher?
If the alarm is active against water overflow, turn off the dishwasher and disconnect the water supply. Contact CDA service.
General| Door color | Not applicable |
|---|---|
| Display type | LED |
| Appliance placement | Fully built-in |
| Control panel color | Stainless steel |
| Washing class | A |
| Noise level | 52 dB |
| Number of place settings | 12 place settings |
| Number of washing programs | 5 |
| Water consumption per cycle | 16 L |
| Energy consumption per cycle | 1.05 kWh |
Weight and Dimensions| Depth | 570 mm |
|---|---|
| Width | 596 mm |
| Height | 875 mm |
Collects appliance info, states CE compliance, and outlines disposal guidelines.
Key safety advice to prevent hazards and ensure proper use of the dishwasher.
Tips for efficient operation, energy saving, and proper dish loading.
Step-by-step guide to prepare the dishwasher for its initial wash cycle.
Explanation of all buttons, displays, and indicator lights on the control interface.
Instructions for starting, changing, cancelling programmes, and switching off the appliance.
Guide to using detergent, adding salt, and managing rinse aid levels.
Procedure for testing water hardness and setting the softener level for optimal performance.
Guidance on basket adjustment and best practices for loading dishes.
Details on capacity, test data, and a comprehensive programme listing with consumption figures.
Instructions for cleaning door seals, filters, and spray arms for optimal performance.
Guides for diagnosing and resolving error codes and common operational problems.
Information on safe electrical hook-up, fuse replacement, and plug fitting.
Covers water supply, drainage, leveling, and door fitting for integrated installation.
To Next Page
