What to do if my CDA WC460 Dishwasher shows error E5?
If your CDA Dishwasher displays error code E5, ensure the water connections are correctly installed, the water intake tap is fully open, and the filter isn't blocked. If the issue continues after these checks, it's best to contact after-sales service for further assistance.
How to fix error E6 on a CDA WC460?
If your CDA Dishwasher is showing error E6, check the drain hose to make sure it is not kinked or crushed. Also, inspect the siphon and filter to ensure they are not blocked. If the problem persists after checking these items, contact the after-sales service.
What to do if CDA Dishwasher displays error E2?
If your CDA Dishwasher displays error code E2, interrupt the current program and switch off the dishwasher. Then, switch it back on, reprogram it, and start the washing cycle again. Should the problem continue, it is recommended to contact the after-sales service.
What to do if CDA WC460 Dishwasher shows error E4?
If error code E4 appears on your CDA Dishwasher, interrupt the program and turn the dishwasher off. Turn it back on, set your program again, and start the wash cycle. If the error continues, contact the after-sales service.
General| Brand | CDA |
|---|---|
| Model | WC460 |
| Category | Dishwasher |
| Language | English |
To Next Page
