Why does my CDA Dishwasher show error F2?
If your CDA Dishwasher displays the F2 error, it could be due to a blocked drain hose or blocked filters. First, restart the dishwasher and cancel the program. If the error continues after that, it is recommended to contact CDA Customer Care.
What to do if CDA Dishwasher displays F1 error?
If your CDA Dishwasher shows the F1 error, turn it off and disconnect the water supply. Then, contact CDA Customer Care.
What to do if my CDA WC461 shows error F5?
If your CDA Dishwasher displays the F5 error, ensure the water tap is fully open. If the error persists, close the tap, detach the water inlet hose, and clean the filter. Then, restart the dishwasher. If the issue continues, it is recommended to contact CDA Customer Care.
General| Door color | Not applicable |
|---|---|
| Built-in display | No |
| Appliance placement | Fully built-in |
| Control panel color | Black, Stainless steel |
| Noise level | 47 dB |
| Delay start (max) | 19 h |
| Delayed start timer | Yes |
| Dishwashing programs | Auto 60-70°C, Glass/delicate, Eco, Intensive, Normal, Pre-wash, Quick |
| Number of place settings | 10 place settings |
| Number of washing programs | 8 |
| Drying class | A |
| Annual water consumption | 3360 L |
| Annual energy consumption | 237 kWh |
| Water consumption per cycle | 12 L |
| Energy consumption per cycle | 0.83 kWh |
Weight and Dimensions| Depth | 570 mm |
|---|---|
| Width | 448 mm |
| Height | 870 mm |
Key safety instructions for operating the dishwasher to prevent accidents.
Guidance on starting, changing, cancelling, and switching off the dishwasher.
Procedures for cleaning door seals and the dishwasher's filter system.
Instructions for cleaning the upper and lower spray arms.
Guidance on replacing the fuse and connecting the power plug.
To Next Page
