Electromagnetic locks surface mount series
INSTALLATION MANUEL
3
cdvi.com
cdvigroup.com
3] FITTING KIT
2] REMINDERS AND RECOMMENDATIONS
Electromagnetic locks are designed to require very little maintenance.
Nevertheless, the following procedures will ensure optimum performance:
- The electromagnetic lock and its armature have a special coating to protect them from corrosion.
The contact faces of the lock must always be kept clean to ensure optimal locking.
- If the contact faces are damaged it can reduce the ef ciency of the combination and allow traces
of corrosion to appear.
- An electromagnetic lock works with direct current.
Pins
Steel
washers
Rubber
washers
M4x25
wood
screw
Key
1 M8x35
screw
+
1 M8x20
screw
M3x8
self-tapping
screw
Guide
piece
Cap nut
Surface
mounting
electro-
magnetic
lock
Mounting
plate
Armature
Safety
rope
2 2 2 7
1 x
3mm
+
1 x
5mm
2 1 1 1 1 1 1 2
Contents of the electromagnetic lock kit:
Optional accessories:
Reference
CDVI
L3L4 (300-400KG)
L5 (500KG)
Z3/Z4/Z5 UBK/U UBK/P
AMA3 (300-400 KG)
AMA5 (500KG)
Reference
CDVI UK
L3L4 (300-400KG)
L5 (500KG)
Z3/Z4/Z5 UBK/U UBK/P
AMA3 (300-400 KG)
AMA5 (500KG)
Description
L shaped bracket
for lock
Z shaped bracket
for lock
Armature base
for glass door
Universal base
for glass door
Armature base
To Next Page
Loading...
Need help?
General