Cebora Pocket Pulse User Manual

1
30/03/2017
3.300.154/A
Parti di ricambio e schema elettrico
Spare parts and electrical schematic
Ersatzteile und Schaltplan
Pièces détachées et schéma électrique
Partes de repuesto y esquema eléctrico
Partes sobressalentes e esquema eléctrico
Varaosat ja sähkökaavio
Reservedele og elskema
Reserveonderdelen en elektrisch schema
Reservdelar och elschema
Antallaktika v kai hlektriko v sce-
d ia vgr amma
Pagg. Sid. sel.: 85 ÷ 89
I -MANUALE DI ISTRUZIONI PER SALDATRICE A FILO pag. 2
GB -INSTRUCTION MANUAL FOR WIRE WELDING MACHINE page 10
D -BETRIEBSANLEITUNG FÜR DRAHTSCHWEISSMASCHINE seite 17
F -MANUEL D’INSTRUCTIONS POUR POSTE A SOUDER A FIL page 25
E -MANUAL DE INSTRUCCIONES PARA SOLDADORA DE HILO pag. 33
P -MANUAL DE INSTRUÇÕES PARA MÁQUINA DE SOLDAR A FIO pag. 41
SF -KÄYTTÖOPAS MIG-HITSAUSKONEELLE sivu. 48
DK -INSTRUKTIONSMANUAL FOR SVEJSEAPPARAT TIL TRÅDSVEJSNING side.55
NL -GEBRUIKSAANWIJZING VOOR MIG-LASMACHINE pag.62
S -INSTRUKTIONSMANUAL FÖR TRÅDSVETS sid.70
GR -
ODHGOS CRHSEWS GIA SUSKEUHV SUGKOLLHSHS ME NHMA sel.77

Cebora Pocket Pulse Specifications

General

Input Voltage	230V
Input Current	16A
Duty Cycle	200A @ 20%
Wire Diameter	0.6 - 1.0 mm
Protection Class	IP23S
Weight	12.5 kg
Welding Processes	MIG/MAG

Summary

Safety Precautions

Electric and Magnetic Fields (EMF)

Explosions

Front Panel Controls and Display

Front Panel Controls Overview

Display Screen Functions

Installation and Start-Up Procedures

MIG Welding with Gas Setup

Provides step-by-step instructions for installing and starting MIG welding with gas.

Reel Fitting Sequence

Welding without Gas Setup

Outlines the steps for preparing and starting welding operations without gas.

Parameter Configuration and Functions

Accessing Service Functions (Process Params)

Explains how to navigate and select functions within the service menu.

Wire Selection and Start Mode Configuration

Details how to select wire types and set welding start modes (2T, 4T, 3L).

Spot and Pause Time Settings

Guides on adjusting spot welding duration and pause time between welds.

Crater Filler (CRA) and Inductance Adjustment

Covers configuring crater filler settings and adjusting inductance for arc characteristics.

Burnback and Soft Start Configuration

Pre Gas and Post Gas Settings

Maintenance and Repair

Generator Maintenance Procedures

Post-Repair Procedures