cecotec BOLERO SQUAD 2001 - Page 66

66
ENGLISH
Unlocking the buttons
Press and hold the Timer button and the Boost Mode button to unlock the buttons.
Timer
- You can set the timer in two dierent manners:
- You can use it as an external timer. In this case, no cooking zone will be switched o when
the timer ends.
- You can set it so one or both cooking zones turn o once the time expires.
- The maximum time is 99 minutes.
Using the timer as an external timer
Fig. 18
1. Make sure the hob is on.
2. Press the timer button, the timer indicator will start ashing and the timer display will
show 10.
3. Set the time by using the – or + buttons of the timer.
4. Press the – or + buttons simultaneously to cancel the timer and the time display will
show 00.
5. Once time is conrmed, the countdown will start automatically. The display will show the
remaining time and the timer indicator will ash for 5 seconds.
6. When the countdown ends, it will beep for 30 seconds, and the timer indicator will show
- -.
Please note
You can use the timer even if you have not selected any cooking zone.
Tips
- Press the + or – buttons on the timer once to increase or decrease the time in 1-minute
intervals.
- Hold down the + or – buttons on the timer to increase or decrease the time in 10-minute
intervals.
Using the timer to turn o a cooking zone
Fig. 19
1. Press the cooking-zone selection button of the area you wish to programme the timer for..
2. Press the timer button, the timer indicator will start ashing and the timer display will
show 10.
3. Set the time by using the – or + buttons of the timer.
4. Press the – or + buttons at once to cancel the timer and the time display will show 00.
5. Once time is conrmed, the countdown will start automatically. The display will show the
remaining time and the timer indicator will ash for 5 seconds.