cecotec CONGA 1290 Series - Charging Base Components; Remote Control Overview

ENGLISH
21
Charging base
1
4
3
2
1. Charging socket
2. Charging base top cover
3. Charging base middle cover
4. Charging terminals
Remote control
1
2
3
4
5
8
7
6
1. LED display
2. Back home
3. Direction buttons
4. Power level
5. Water intensity/time settings
6. Schedule
7. ON/OFF button
8. Mode (only operates from standby mode)
Battery
• The remote control requires 2 x AAA-type batteries.
• If the remote control is used near the charging base, the device might not recognize the
command.
• Remove the batteries from inside the remote control if the robot is not going to be used
for a long time.
Conga Serie 1290_Manual_GC.indd 21 25/7/18 7:37