cecotec CONGA 1290 Series - 5. Cleaning and Maintenance; Cleaning Water, Dust Tank, and Filters

ENGLISH
29
Holding from the bottom of the dust tank, press the
release button to take out the dust tank.
Lift up the dust tank
handle.
Remove the dust tank
from the water tank.
Open the dust tank cover.
Take the primary and EPA
filter out.
Empty the dust tank.
Wash the dust tank and
the primary filter using
water. Clean the EPA
filter with a brush, avoid
washing it under water.
Install the primary filter
and the EPA filter into dust
tank.
CLEANING SENSORS AND WHEELS
• Use a soft damp cloth to clean wheels and sensors.
Conga Serie 1290_Manual_GC.indd 29 25/7/18 7:37