cecotec CONGA 2690 - Mobile App and Wi-Fi Connectivity (Continued); App-Controlled Cleaning Modes

38
ENGLISH
Your Smartphone’s data are on. In this case, turn them off.
* This Conga model is compatible with Alexa and Google Assistant virtual assistants.
The following modes can be activated from the App:
Auto cleaning mode:
From standby mode, press the Auto mode button on the App and the robot will automatically
start operating. It will carry out a cleaning cycle in zigzag motion and then another one in Edge
mode, Once it has nished, it will return to the charging base.
It is the most commonly used cleaning mode and it is used to efciently clean the whole house’s
surface. The robot vacuums the oor’s dust automatically, in and organized and efcient way,
as it features memory and gyroscopic navigation supported by its camera.
Moreover, it changes direction when it nds obstacles throughout its route and it returns to
the charging base in a smart and direct way once the cleaning is over.
It includes Total Surface function, through which the robot cleans the whole surface and, if
necessary, returns to the charging base to recharge its battery and nish cleaning.
Edge mode
Select this mode from the App or the remote control, the robot will clean along the edges and
will return to the charging base through its smart technology once it has nished.
If there is no charging base, the robot will return to the starting point.
Random mode
Select this mode from the App, the robot will start cleaning randomly and then will return to
the charging base with its smart technology once it runs out of battery.
The robot will not create any map under this mode.
Twice mode
Select this mode from the App, the robot will carry out 2 whole cleaning cycles.
When the cycle is completed, it will return to the charging base with its smart technology.
Scrubbing mode
Select this mode from the robot buttons or from the App. When this mode is activated, the
robot moves in a swaying motion, simulating real scrubbing moves.
The robot will start cleaning in zigzag, then in Edge mode and it will nally return to the
charging base, taking the straightest way back home while memorizing the route.
If it runs out of battery before nishing, it will recharge and the resume cleaning until nished.