ENGLISH
29
2. Wash and dry completely the mop cloth.
WATER TANK CLEANING
1. After nishing mopping the oor, remove the water tank from the robot and detach the
mopping cloth. Empty the remaining water.
2. Air and dry completely the water tank.
SUCTION CHANNEL AND SIDE BRUSHES CLEANING
1. Clean the suction channel with a cloth if there is dust.
2. Remove the side brushes from the robot and clean them with a clean cloth.
OTHER COMPONENTS` CLEANING
1. Clean the omnidirectional wheel regularly to avoid hair from tangling around it.
2. Use a dry cloth to clean the free-fall sensors regularly to ensure good operation.
To Next Page
Loading...
