cecotec CONGA 990 Series - Operation; Remote Control Operation; Cleaning Modes Overview

ENGLISH
25
4. OPERATION
REMOTE CONTROL
Start cleaning
• If the robot is in standby mode, press On/off button on the remote control or on the
robot to wake it up.
• Press the On/off button on the remote control or on the robot to start automatic
cleaning.
Pause/stop cleaning
• Press the On/off button on the remote control or on the
robot to pause or stop automatic cleaning.
MODES
In order to offer a high-quality nish in all types of surfaces, the robot offers different cleaning
modes that can be set from the remote control.
Auto Mode
• The most-common cleaning mode. The product cleans the oor
automatically, if there are obstacles in front of it, it will change
direction automatically. This mode is used to clean the entire
house. It is also the mode which operates under scheduled
cleaning. The robot will automatically return to the charging
base when its battery is 15 %.
Spot Mode
• During this mode, the robot cleans a specic area. It starts at the
desired point and cleans outwards in spiral movements. Once it
has nished cleaning, it returns automatically to the initial position.