EasyManua.ls Logo

cecotec Conga Connected - Red light flashing errors; 7. TECHNICAL SPECIFICATIONS

cecotec Conga Connected
126 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
ENGLISH
Red light
ashing
1 beep Mixed tank
error.
Insert the mixed tank and press the Start/
Pause to restart the robot vacuum cleaner.
2 beeps Bumper error Check if the bumper is blocked and press on
both sides and center to unblock it.
3 beeps Free-fall sensor
error Check if the robot is placed on an uneven
surface, if its wheels are o the ground or
if it is stuck in a dark place and move it to a
new location. Otherwise, clean the free-fall
sensor.
4 beeps The robot
vacuum cleaner
cannot return
to its charging
base or
its initial
position.
Make sure there are no obstacles in front
of the charging base. Clean the charging
terminals on both the charging base and the
robot with a clean, soft and dry cloth.
7. TECHNICAL SPECIFICATIONS
Product: Conga Connected
Product reference: 05784
Voltage: 100-240 V ~, 50/60 Hz
Rated capacity: 14.4 V, DC 2500 mAh
Typical capacity: 2600 mAh
Frequency bands: 2.4 GHz
Maximum Transmission Power: 17.5 dBm
Technical specications may change without prior notication to improve product quality.
Made in China | Designed in Spain
05784_Conga Connected_IM_YV_01220502.indd 4805784_Conga Connected_IM_YV_01220502.indd 48 3/5/22 15:223/5/22 15:22

Table of Contents

Related product manuals